Engineering Standards: SYMBOLS

NOTE: Must have AutoCAD to open DWG files.

Individual General Symbols
G01 north arrow	G16 title: view	G29 scale: 1/8"+1'-0"	G42 - Not Used
G02 detail bubble	G17 title: section	G30 scale: 1/16"+1'-0"	G43 scale
G03 - Not Used	G18 title: detail	G31 scale: 1"+10'-0"	G44 submittal block
G04 cut tails - left	G19 "A" column call out	G32 scale: 1"+20'-0"	G45 county map
G05 cut tails - right	G19A "1" column call out	G33 scale: 1"+30'-0"	G46 key notes 1
G06 - Not Used	G20 scale: 1"=1"	G33a scale: 1"=40'-0"	G47 - 2
G07 section cut - right /view down	G21 scale: 1/2"=1"	G34 scale: 1"+50'-0"	G48 - Not Used
G08 section cut - right / view up	G22 scale: 3"=1' -0"	G35 scale: 1"+60'-0"	G49 acronyms
G09 section cut - left / view down	G23 scale: 1-1/2"+1'-0"	G36 scale: 1"+100'-0"	G50 product options block
G10 section cut - left / view up	G24 scale: 1"+1'-0"	G37 - Not Used	G51 General Notes
G11 section cut - bot / view right	G25 scale: 3/4 "+1'-0"	G38 Key Plan
G12 section cut - top / view right	G26 scale: 1/2"+1'-0"	G39 UCNI stamp
G13 section cut - bot / view left	G27 scale: 3/8 "+1'-0"	G40 90% review
G14 section cut - top / view left	G28 scale: 1/4"+1'-0"	G41 door schedule
G15 - Not Used		G41A door schedule information

NOTE: Must have AutoCAD to open DWG files.

Date	SymNo.	Reason for Revision
9/16/04	G03, G06, G15, G37, G42, G48	Deleted, Not Used
9/16/04	G01, G18, G38, G40, G51*	Modified. *New.
4/12/05	G39	Modified.
7/29/05	G33a	New

To be notified of any changes to these documents, contact Tobin Oruch, Standards Manager.
Please feel free to send feedback/suggestions to the Discipline POC, Richard Trout