Los Alamos National LaboratoryGo to the Lab's home pageSearch for people in the Lab's directorySearch the Laboratory's Web site
LANL Engineering Standards
  Home  |  EngStds Manual  |  SPECS  DRAFTING Manual DWG & Details  |  O&M Manual  |  POCs                          | CENG Office
 

These are Mandatory Documents and apply to:
All Lab personnel and subcontracted designers performing engineering services for LANL, both programmatic and facility -- including maintenance and modification of existing equipment and facilities and new facilities and equipment. [ IMP 341.2 ]

Contact Tobin Oruch, Standards Manager
to be notified of any changes to this document set.
Please feel free to send feedback/suggestions to the Discipline POC.


LANL Engineering Standards Scope and Applicability Matrix

[ Last Modification: 28 Feb, 2008 ]



Engineering Standards Manual   [ISD 341-2]                                          Search

Master Specifications                                                                                  MONTHLY UPDATE   

Drafting Manual  
      
Drafting Symbols Library

NEW! Design Guides
(Available for LANL Internal Only)

Operations & Maintenance Manual [OST 230-05-01]   
 
Please ensure you are using the most current version. It is your responsibility to destroy any outdated copies.

Empty Browser Cache or History Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  Engineering Standards Manual               
History [off Chpt pages]
Chapter Title Point-of-Contact
  Introduction Tobin Oruch, CENG Stds Mgr
Ch. 1 General Tobin Oruch, CENG Stds Mgr
Ch. 2 Fire Protection Julie Wood, ER-FP
Ch. 3 Civil

James Haugen, MSS-UI

Ch. 4 Architectural David Chavez , PE-DO
Ch. 5 Structural Michael Salmon, D-5
Ch. 6 Mechanical Charles DuPré, ES-DE
Ch. 7 Electrical David Powell, ES-DE
Ch. 8 Instrumentation & Controls Mike L. Clemmons, ES-DE
Ch. 9 Security Robert Gonzales, SEC-PPS1
Ch. 10 Hazardous Process Mike L. Clemmons,ES-DE
Ch. 11 Radiation Protection Art Crawford, RP-3
Ch. 12 Nuclear Mel Burnett, ES-SE
Ch. 13

Welding

Kelly Bingham, ES-DE
Ch. 14 Sustainable Design Tobin Oruch, CENG Stds Mgr
Ch. 15 Commissioning [Future] James Bodnar, CM-DO
Ch. 16 IBC Program Tobin Oruch, CENG Stds Mgr
Ch. 17 Pressure Safety Charles DuPré, ES-DE
     

 

 

  Standard Drawings & Details                            
History [future]
Chapter Discipline Point-of-Contact
 
 
Ch. 2 Julie Wood, ER-FP
Ch. 3 Civil James Haugen, MSS-UI
Ch. 4 Architectural David Chavez , PE-DO
Ch. 5 Structural Michael Salmon, D-5
Ch. 6 Mechanical Charles DuPré, ES-DE
Ch. 7 Electrical David Powell, ES-DE
Ch. 8 Instrumentation & Controls Mike L. Clemmons, ES-DE
     
     
   

 

 

 

 

  LANL Master Specifications                  
  Specifications Index (links to .doc and .pdf files) Tobin Oruch, CENG Stds Mgr
§ 100/200 General & Specification Requirements
  Spec Crosswalks (no links, for reference use only)
       
Crosswalk with POC's Sorted by New Spec Number
        Crosswalk Sorted by Old Spec Number




Superceded Archived Specs:
MasterFormat2004 Conversion Notice
In February 2006 the LANL Master Specs were renumbered/retitled to conform to CSI's new 50-division system.

The new specs all started at Rev 0 and have a spec date of 1/6/06 or later.  The new spec numbers are 6- or 8-digits and are segmented; e.g., 31 2000 and 31 2323.33 are Div 31 specs.  They should be used for projects that start after 3/1/06.

Crosswalks -- to locate a new spec using its old number (and visa-versa) -- are provided on this webpage.  Also available by clicking on the link are the Old spec versions (dating back a few years) .

The Rev 0 specs dated 1/6/2006 are technically identical to their superseded, pre-2006 ancestors.  Two exceptions: the specs on Filters and Surge Protective Devices were split up into two separate specs addressing dissimilar parts of the original spec scope (see crosswalk for mapping), and other technical changes were made.

Additional spec splitting may occur in the future -- e.g., since there are now multiple mechanical divisions, each may get a spec on hangers and supports versus the single spec that was put in the division where it is most used.

 

 

 

 

  Drafting Manual                                                History
Section Title
 
POC: Richard Trout, ES-DE, 665-1142
  Table of Contents
100 General Requirements
200 Drafting Requirements
300 Drafting Symbols & Conventions
Att. 1 Historically Used Drawing Numbers
Att. 2 Existing Facility Modification Process Guidance
Appendices Charts & Legends Index
Individual Symbols

General | Architectural | Civil | Fire | Electrical | Mechanical | P&ID/PFD |

  Plumbing | Structural | Welding |
   
  History Site
   

 

 

 

 

  Drafting Symbols Library
  Discipline
 
POC: Richard Trout, ES-DE, 665-1142
  MASTER INDEX (no links) for Hardcopy Printing
  General
  Architectural
  Civil
  Electrical
  Fire Protection
  Mechanical
  P&ID / PFD
  Plumbing
  Structural [FUTURE]
 

Welding

 

 

 

 

 

  O & M Manual                                                 History [future]
Section Title
 
POC: Todd Siverling , MSS-MSE, 667-3360
  MASTER INDEX
§ 100 Manual Administration
§ 200 Operations and Maintenance Management Program Administration
§ 300 Utilities and Infrastructure
§ 400 Mechanical Systems and Equipment
§ 500 Electrical Systems and Equipment
§ 600 Structural/Building Systems
§ 700 Fire Protection Systems and Equipment
 
  History Site [Future]
  Reviews Site

                 

 

 

 

 

  Standard Contacts                                 
  Discipline
  POC/Committee Members
  Subject Matter Experts
  Standards Board Members
  Program Direction Personnel

 

 

 

 

  Resources and References                                 
  Links
  Universe of Codes, Standards, Orders, Laws, and Regulations
 

Standards POC's Top 10 Design Errors and/or Issues

  DOE Subject Experts and Links
  Article: Best Practices for a DOE site Eng. Stds. Program, by T. Oruch (p.5)
  PMD Procedures & Guides


END